|
|
|
MICRO
BUTT WELDERS FOR FINE WIRED MODEL - JK MB.
|
|
|
| J.
K. Weld introduced for the benefit of the entire
wire processing industries a series of Micro Butt Welding Machines
specially designed for butt welding of ferrous and non ferrous
wires in the range of 3.0 to 2.50 mm dia, to withstand subsequent
drawing. This machines are designed as table models and constructed
with particular regard for easy operation. The automatic welding
process guarantees high tensile and uniform weld, depending
upon the material to be welded and the size of wire, seven different
models are available; four models for the welding of iron, steel
and nickel wires and two models for the welding of Copper, Brass,
Bronze and Aluminum wires. Shearing device and illuminated magnifier
are available as standard option extras.
WELDING
PROCESS these micro butt welders are automatic
upset butt welding machines. The ends of wires to be joined
are "prepared" on the special shearing attachment
provided. The welding current and the initial upset gap are
set accordingly to the size of wire, the upsetting pressure
being preset at works. The wire ends are then rigidly clamped
by special quick acting clamps and viewed through an illuminated
magnifying glass provided, to ensure correct alignment of
the wire ends. By depressing a push button, the welding cycle
is initiated and completed automatically by built in control.
The weld is completed; the job is no de-clamped and annealed
if necessary in the annealing.
|
|
WELDING
DATA
|
|
MACHINE
TYPE
|
JK
MBW-150
|
JK
MBW-250
|
JK
MBWS
|
JK
MBW-C
|
JK
MBW-050
|
|
MATERIAL
|
IRON
|
IRON
|
COPPER
|
COPPER
|
COPPER
|
|
TO
BE WELDED
|
STEEL
NICKLE
|
STEEL
NICKLE
|
BRASS
BRONZE
ALUMINIUM
|
HIGH CARBON
MILD STEEL
ALUMINIUM
|
STEEL
HIHG CORBON
|
|
WELDING
RANGE INDIA (MM)
|
0.50-1.50
|
0.80-2.50
|
0.50-150
|
0.80-2.50
|
0.28-0.50
|
|
|
SPECIFICATIONS
|
|
TYPE
|
Precision
Micro Wire Butt Welding Machines, designed as table
models.
|
|
CONSTRUCTION
|
Main
body housing the welding transformer, fixed and moveable
platens, constructed from aluminum casting.
|
|
UPSET
TRAVEL
|
Moveable
platen travel on two parallel guides of precision
designed and construction, ensure accurate and frictionless
travel and perfect alignment of the weld.
|
|
UPSET
PRESSURE
|
Provided
by a precision spring action on the moveable platen
precalibrated at works.
|
|
CLAMPS
|
Copper
alloy clamps of precision quick action design ensure
fixed clamping of wires.
|
|
ELECTRODES
|
Special
wear resisting copper ally electrodes provided with
precision v-grooves permit rapid and accurate alignment
of wires.
|
|
ADJUSTMENT
OF WELDING CURREENT
|
8
positive rotary switch, mounted in front permits easy
manipulation of the welding current in 8 steps.
|
|
VARIATION
OF INITIAL UPSET GAP
|
Obtained
by setting of a calibrated cram mounted on the fixed
platen and acting on a stop fitting on the moveable
platen.
|
|
CURRENT
INITIATION
|
Effected
by a manual push button fitted on one side of the
platen.
|
|
WELD
CURRENT CUT CFF
|
Effected
automatically in relation to the prest upsetting distance.
|
|
ANNEALING
FACILITY
|
Separated
annealing electrodes for annealing of the welded wire
provided.
|
|
|
TECHNICAL
DATA
|
|
MACHINE
TYPE
|
JKMWB
|
JKMWB
|
JKMWB
|
JKMWB.C
|
JKMWB.S
|
|
NORMAL
ELECTRICAL KVARATING
|
1
|
1
|
1
|
3
|
1
|
|
INPUT
VOLTS
|
230V
|
230V
|
230V
|
230V
|
230V
|
|
FREQUENCY
|
50
|
50
|
50
|
50
|
50
|
|
PHASE
|
1
|
1
|
1
|
1
|
1
|
|
FUSE
RATING
|
6
|
6
|
6
|
13
|
6
|
|
RANGE
DIA IN MM
|
0.50-1.5
|
0.8-2.5
|
0.50-1.5
|
0.8-2.5
|
0.28-0.50
|
|
|
N.
B. In view of continuous developments, we reserve right to modify
the design, dimensions,
technical data and weight without any notice.
Back
|
|
